Properties：Stainless Steel Dust-removing Filter
Stainless Steel Dust-removing Filter Element for The Alumina Industry Replace Filter Bag
The traditional dust-removing method is to send the high temperature gas into the nonmetal filter bags after processing in cooling system. Compared with the traditional filter gas, the high temperature dust-removing filter element has the advantage that resistant to high temperature, high strength, wear-resisting. Reusable etc.
Structure: same as filter bag(Easy to replace and install)
Size:180×1000mm,180×1200mm,180×1600mm,and Customize Size.
1.Dust content at the outlet can be less than 5 mg.
2.Reusable, can be cleaned by backflush, no deformation, service life up to 5-8 years.
3.Reduce maintenance and replacement costs.
4.Applicable to various dust removal equipment.
5.Working temperature up to 300 ° C.
6.Able to withstand high wind pressure and difficult to deform.
Stainless Steel Dust-removing Filter Element Image:
Stainless Steel Dust-removing Filter Element Applications:
Alumina industry, power plant, cement plant, special conditions with large dust content.
Stainless Steel Dust-removing Filter Element Features:
1. Simple technical process as gas is filtered directly. |
2. Good air permeability, stable filter rating, no leakage. |
3. Reusable, easy to installation, high working efficiency, long working life. |
4.Dust content at the outlet can be less than 5 mg. |
5.Reusable, can be cleaned by backflush, no deformation, service life up to 2 years. |
